Smart home lighting control and apartments

That is, when placing the switch at the end of a dark, long corridors, in order to turn it on, you need to approach it in the dark. And when you need to leave the room, again, want to first turn off the light, and then, in the dark to go back. The problem, of course, can not avoid turning off the light in the hallway. But, as a result, will spend an excessive amount of power.



If the corridor is part of the "smart home", these problems will not occur ever. In this case, you can solve the problem of lighting in different ways. First - install motion sensors in the room. They will allow the lighting is switched automatically, as soon as a person enters the room. Second - turn on the lights, you can use your voice, when people just say out loud command, had previously given remote control or telephone.

Installing the system in the house "smart" lighting control, you can still fine tune it in normal lighting possible
. For example, you can spend one-touch control of all lights, activating the pre-programmed scenarios, such as such as "Watch a movie" or "party." In addition, you will be able to automatically adjust the light, depending on the level of daylight, current time of day and other parameters. Also, if the usual lighting system will bring you coverage of only two states - on and off, then the "smart home" can adjust the brightness level.



Create a functional is not very difficult. To use the remote control to set the special sensors that are able to receive these signals. To turn on the lights in a room when a person would be required of sensors or movement. For activation of the scenarios you want to connect lighting equipment to a PC or PLC. This will also be necessary for the functioning of such options as presence simulation.